Products

« Back to Products Page
RLM SS Kits
ENLARGE
UV_Resources_RLM_SS_Packaged_HVAC_Illustration.jpg

RLM SS Kits

Designed for smaller HVAC equipment, the kit combines name-brand UV-C components in a simple, flexible and affordable design. Among its features is a state-of-the-art CU2™ for local or remote lamp/ballast monitoring and several convenient power knock-outs for ease-of-wiring from within, or outside, the equipment it is serving.

Ideal for both new and retrofit applications, the RLM S/S Kit easily installs in most any position to generate 360-degree UV-C irradiation where energy is needed the most, eliminating the need for difficult maintenance.

Simple and Flexible

Easy and flexible to specify, install and service, the RLM S/S fixture is mounted remotely from the lamp making the complete install simple, quick and near fail-safe. Lamp holding and locating mechanisms simplify lamp positioning and securing.

The UV-C energy delivered by the RLM S/S Kit can reduce system maintenance costs and downtime, energy use and airborne levels of noxious and infectious microorganisms, thus helping to improve overall indoor air quality. Since poor IAQ is linked to higher absenteeism, employee turnover and a loss of productivity, the use of UV-C can greatly improve operational efficiencies.

Other benefits include:

  • Remote power supply. Installers can locate the RLM S/S Kit’s 120-277, UL Listed, fully PnP power supplies remotely.
  • Flexible lamp sizes: Standard output lamps are available in 12”, 17”, 22” and 33-inch lengths
  • A heavy-gauge galvanized steel power supply housing.
  • The state-of-the-art CU2™ sensor provides visual LED and analog output methods of verifying lamp and ballast on/off operation.
  • Worldwide availability of name-brand replacement lamps and power supplies.
  • A five-year power supply warranty.
  • A one-year lamp warranty.
More Info & Pricing

The S/S Kit provides everything needed to maximize the benefits of UV-C and at the lowest price. Components are easy to install and maintain and they include a high efficiency power supply, state of the art lamp holding mechanisms and a long life lamp that’s of “government required” low waste content to surpass today’s environmental standards.

The S/S Kit marries the latest technology in an affordable product that fits-up simply and easily to smaller equipment. Power supplies are mounted remotely from the lamps making the complete install simple, quick and near fail-safe. The CU2 offers local and remote lamp/ballast monitoring, critical for systems located above ceiling panels and out of sight. Lamp holding and locating mechanisms make lamp positioning, and securing, a snap. Simply attach the lamp and loom to the power supply; position the lamp into the lamp holder and attach… you’re ready to go.

RLM S/S Kits are factory assembled and tested. They consist of a galvanized fixture, power supply, CU2 lamp/ballast monitor, UV-C resistant lamp holder, lamp clamp and loom, lamp holster and lamp. Fixture and components are designed and constructed to withstand HVACR environments, and are UL/CUL Listed.

Fixture is heavy duty galvanized metal with 3- ½” knock outs, grounding lug and viewport for CU2 high output LED visibility.

Power Supply is UL/CUL Listed as an electronic, variable input (120–277 Vac ± 10%), rapid start type with overload and end-of-lamp-life protection. It is a Type 1, Class P, sound rated A, with a high power factor, inherent thermal protection and no PCB’s, to maximize lamp radiance, life and reliability at temperatures of 0-70˚C. Power supply is warranted for three years.

Lamp/Ballast Monitor – The CU2™ lamp/ballast monitor is constructed of industrial grade polycarbonate and equipped with a direct-read high output green LED. It features two mounting holes with an external wiring block for wiring to a remote-sensing, or, input-device. When installed between a lamp and ballast, the CU2 produces a 0-5Vdc signal for remote-monitoring.

LampClamp™/Loom is comprised of 18 AWG, 600V, UV-C resistant sheathed wire, wrapped in aluminized Mylar and jacketed with carbon-impregnated thermoplastic for moisture resistance and to meet UL Subject 13, UL 1581, and Article 725 (NEC) as Plenum Rated. They are equipped with a 4- pin LampHolder™ and LampClamp™ combination to facilitate fitment to 4-pin single-ended lamps and to provide a watertight and very secure screw-on compression nut to the lamp.

LampHolsters™ facilitate 360° UV irradiance and lamp installation and removal. They are constructed of carbon-impregnated thermoplastic to provide a safe, durable, and quick way to position, overlap, and/or suspend lamps in a UV treatment cavity, for unmatched intensity where system air velocity is greatest.

Lamps are low-pressure, high-output, T5 diameter, four-pin single ended type that emit short-wave UV-C of predominantly 253.7 nm. Lamp glass is doped to increase useful life and to preclude ozone production. Each lamp shall have less than 8mg of mercury and produce the specified output at 500 fpm in temperatures of 1-70˚ C. Lamp life to be 9000 hours with less than a 20% drop in output at end-of-lamp-life.

DOOR SAFETY / INTERLOCK SWITCH

  • Meets all market specifications
  • Industry's lowest cost of ownership
View Detail

VIEWPORT/ACCESS DOOR

  • Meets all market specifications
  • Industry's lowest cost of ownership
View Detail

UV-Com Control Panel

  • Simple Go/No Go "real-time" verification of both lamp and ballast operation
  • Provides a highly visible green Status LED indicator locally
  • Monitor up to 8 lamps/ballasts or daisy chain multiples of this
  • Offers a 5Vdc signal that's easily monitor by most Building Management Systems
  • Solid state, needs no power and lasts fo 50,000 hours or more
  • No noeed to shut lights off, enter a plenum or trigger a door switch
  • Rated up to 5 amps per connection
  • 5-year product warranty
View Detail

Ask the expert

Have questions? Just ask!