Products

RLM SS All-in-One Kit

Simple, Flexible and Affordable Design

Designed for smaller HVAC equipment, the kit combines name-brand UVC components in a simple, flexible and affordable design.

Ideal for both new and retrofit applications, the RLM S/S Kit easily installs in most any position to generate 360-degree UVC irradiation where energy is needed the most, eliminating the need for difficult maintenance.

Specs and Certifications

Lamps included with this fixture provide an average of 9,000 hours of operation.
Input power voltage configuration.
Primary disinfection mode: Air & Surface, Air or Surface.
Primary fixture mounting: internal duct/plenum or external duct/plenum.
Electrical/ballast enclosure rating as defined by the National Electrical Manufacturers Association (NEMA).
Product is free from defects in material and workmanship from the date of first purchase.
Electrical safety standard as defined by Underwriters Laboratories (UL); Accessories, Air-Duct Mounted (ABQK).

SIMPLE AND FLEXIBLE:
Easy and flexible to specify, install and service, the RLM S/S fixture is mounted remotely from the lamp making the complete install simple, quick and near fail-safe. Lamp holding and locating mechanisms simplify lamp positioning and securing.

The UVC energy delivered by the RLM S/S Kit can reduce system maintenance costs and downtime, energy use and airborne levels of noxious and infectious microorganisms, thus helping to improve overall indoor air quality. Since poor IAQ is linked to higher absenteeism, employee turnover and a loss of productivity, the use of UVC can greatly improve operational efficiencies.

Other benefits include:

  • Remote power supply: Installers can locate the RLM S/S Kit’s 120-277, UL Listed, fully PnP power supplies remotely.
  • Flexible lamp sizes: Standard output lamps are available in 12″, 17″, 22″ and 33-inch lengths
  • Enclosure: A heavy-gauge galvanized steel power supply housing.
  • The state-of-the-art CU2™ sensor provides visual LED and analog output methods of verifying lamp and ballast on/off operation.
  • Worldwide availability of name-brand replacement lamps and power supplies.
  • A five-year power supply warranty.
  • A one-year lamp warranty.

EASE OF INSTALLATION:
Power supplies are mounted remotely from the lamps making the complete install simple, quick and near fail-safe. Lamp holding and locating mechanisms make lamp positioning, and securing, a snap. Simply attach the lamp and loom to the power supply; position the lamp into the lamp holder and attach… you’re ready to go.

RLM S/S Kits are factory assembled and tested. They consist of a galvanized fixture, power supply, CU2 lamp/ballast monitor, UV-C resistant lamp holder, lamp clamp and loom, lamp holster and lamp. Fixture and components are designed and constructed to withstand HVACR environments, and are UL/CUL Listed.

Fixture is heavy duty galvanized metal with 3- ½” knock outs, grounding lug and viewport for CU2 high output LED visibility.

Power Supply is UL/CUL Listed as an electronic, variable input (120–277 Vac ± 10%), rapid start type with overload and end-of-lamp-life protection. It is a Type 1, Class P, sound rated A, with a high power factor, inherent thermal protection and no PCB’s, to maximize lamp radiance, life and reliability at temperatures of 0-70˚C. Power supply is warranted for three years.

Lamp/Ballast Monitor – The CU2™ lamp/ballast monitor is constructed of industrial grade polycarbonate and equipped with a direct-read high output green LED. It features two mounting holes with an external wiring block for wiring to a remote-sensing, or, input-device. When installed between a lamp and ballast, the CU2 produces a 0-5Vdc signal for remote-monitoring.

LampClamp™/Loom is comprised of 18 AWG, 600V, UV-C resistant sheathed wire, wrapped in aluminized Mylar and jacketed with carbon-impregnated thermoplastic for moisture resistance and to meet UL Subject 13, UL 1581, and Article 725 (NEC) as Plenum Rated. They are equipped with a 4- pin LampHolder™ and LampClamp™ combination to facilitate fitment to 4-pin single-ended lamps and to provide a watertight and very secure screw-on compression nut to the lamp.

LampHolsters™ facilitate 360° UV irradiance and lamp installation and removal. They are constructed of carbon-impregnated thermoplastic to provide a safe, durable, and quick way to position, overlap, and/or suspend lamps in a UV treatment cavity, for unmatched intensity where system air velocity is greatest.

Lamps are low-pressure, high-output, T5 diameter, four-pin single ended type that emit short-wave UV-C of predominantly 253.7 nm. Lamp glass is doped to increase useful life and to preclude ozone production. Each lamp shall have less than 8mg of mercury and produce the specified output at 500 fpm in temperatures of 1-70˚ C. Lamp life to be 9000 hours with less than a 20% drop in output at end-of-lamp-life.

Downloads
Accessories

UV-Com™ Lamp/Ballast Monitor

  • Simple Go/No Go “real-time” verification of both lamp and ballast operation
  • Provides a highly visible green status LED indicator locally

Door Safety / Interlock Switch

  • Designed to automatically de-energize the UVC system when opened
  • Required for all AHU access points

Viewport / Access Door

  • Clear, single-pane doors
  • Polished wired glass that is UL-classified and fire-resistant

Ask the Expert

Have questions about this product? Just Ask!