Products

« Back to Products Page
RLM Xtreme
ENLARGE
RLM Xtreme
RLM Xtreme 2

RLM Xtreme

It’s no longer necessary to use costly, awkward, and potentially unsafe metal fixturing that can interfere with system access. Xtreme combines the best UV-C components in a simple, flexible, and affordable system design that’s easily configurable to fit into most any plenum. Its exclusive EncapsuLamp™ (FEP lamp coating) technology protects a system, space, and installer from lamp residues such as gas, mercury, and glass should an accidental lamp break occur. Whether your application is coil irradiation, killing infectious microorganisms, or both, Xtreme delivers flexibility, service life, and the industry’s longest warranties, all at the lowest possible price. For almost a decade, the choice for UV-C has been clear—RLM Xtreme!

 

 

More Info & Pricing

Fueled by growing demand, today’s UV-C systems need to offer application flexibility, ease of sizing and installation, and attractive cost of ownership —and RLM Xtreme leads the way. When compared to other products in the marketplace, Xtreme’s features, functions and benefits come out ahead every time.

Xtreme’s unique LampClamp™ allows lamps to be affixed most anywhere. It also compresses the lamp plug and socket together to fully protect the connection from moisture or direct water. LampHolsters™ complement the LampClamp by allowing UV lamps to simply “slip-in” and click in place, so that they overlap one another. This eliminates the need for multiple lamp lengths, and provides for more “free” energy where it’s needed most. EncapsuLamp™, UVR’s Teflon® lamp coating technology, protects the system, space, and installer from the residues of a broken lamp such as inert gas, mercury, and glass.

No matter what the application may be, Xtreme is the easiest UV-C system to install and service available in the marketplace.

UV-C Fixturing - Fixturing shall consist of a Power Supply, Power Supply Housing, "plenum rated" Wiring Loom, Lamp Plug, Lamp-Plug Protector, Encapsulated Lamp, and LampHolsterTM.

Power Supply – Power supply shall be CSA and UL Listed as a variable input type (120-277Vac ± 10%), 50-60 Hz with a programmed rapid start. They shall be designed as High Power Factor, Class P, Sound Rated "A", Type 1 Outdoor and with Inherent Thermal Protection and no PCB's. They shall be capable of operating in temperatures of from 1-90 degrees C, designed to facilitate plug-and-play wiring and be capable of producing the specified output and organism destruction at no more than 15Watts of power consumption for each square foot of treated, cross sectional area. The power supply shall be capable of properly powering 1- 145W UV-C lamp or 1- or 2- 75W UV-C lamps while ensuring at least 9000 hours of lamp life, and with greater than 80% of its initial output, at the lamps "end of Lamp life" phase. Power supply shall be protected against "end of lamp life" conditions, warranted for 5 years, and be labeled for field wiring. Power supply shall be installed interior or exterior to air handler within a power supply housing (noted in paragraph 2) or a NEMA 4 enclosure (by others).

Power Supply Housing – Shall be constructed of 20ga galvanized, powder coated steel. They shall be designed to facilitate NEC regulated Power Supply installation outside plenums. Each Housing shall be capable of properly holding, grounding and wiring either four or eight ballasts within to protect against electrical shock and moisture, as well as RF and EMI leaks.

Plenum Rated Wiring Loom – Shall be of sufficient length to facilitate lamp connection to a remotely located power supply. The Lamp and Loom shall be capable of being mounted anywhere in the system and/or as shown on the drawings. The Loom shall be meet UL Subject 13 and UL 1581, and Article 725 of the NEC. The loom jacket shall be constructed of UV-C resistant materials and shall have an internal aluminum/Mylar shield.

Lamp Plug – Shall be of the 4- pin type capable of accommodating a single-ended HO lamp.

Lamp-Plug Protector – Shall of UV resistant materials and designed to shrink 3-1 over the Lamp Plug and Wiring Loom for protection against electrical shock, moisture and separation.

LampHolsterTM LampHolsters are dual types, magnetically or permanently affixed within the irradiated cavity to interior surface of air handler or to vertical supports (by others). They shall be constructed of UVC resistant materials and provide for maximum flexibility in quick Lamp positioning, removal and holding power.

EncapsulampTM Lamps - Each lamp shall contain less than 8 milligrams of mercury and shall be hermetically laminated with a thin layer of UV-C transmissible Teflon® to provide protection against lamp breakage and to ensure lamp contents from a broken Lamp are contained. Lamp life shall be 9000 hours with no more than a 20% output loss at the end of the lamps life. Lamps shall be constructed with UV-C proof material bases and shall not produce ozone.

Irradiation – Fixtureless lamps are to be installed in sufficient quantity and in such a manner so as to provide an equal distribution of the available UV-C energy. When installed, the UV-C energy produced shall be of the lowest possible reflected and shadowed losses and shall be distributed in a 360 degree pattern within the cavity to provide the highest UV-C energy absorption by microbial products in the air.

Intensity – The minimal UV-C energy striking a surface shall be sufficient to continuously destroy a mono-layer of mold and/or bacteria in less than one hour while operating in air temperatures of 1-70° C.

Installation – The ballast housing shall be capable of installation within the air stream and/or within a Power Supply Housing. Lamps shall be mounted to irradiate the intended surface(s) as well as all of the available line of sight airstream through proper Lamp placement and incident angle reflection.

Safety – To protect personnel, all access panels and doors to any UV-C assembly and/or within view of any UV-C assembly must include mechanical interlock switch to insure that all UV-C assemblies will be de-energized when any of these accesses are opened.

 

 

DOOR SAFETY / INTERLOCK SWITCH

  • Meets all market specifications
  • Industry's lowest cost of ownership
View Detail

VIEWPORT/ACCESS DOOR

  • Meets all market specifications
  • Industry's lowest cost of ownership
View Detail

UV-Com Control Panel

  • Simple Go/No Go "real-time" verification of both lamp and ballast operation
  • Provides a highly visible green Status LED indicator locally
  • Monitor up to 8 lamps/ballasts or daisy chain multiples of this
  • Offers a 5Vdc signal that's easily monitor by most Building Management Systems
  • Solid state, needs no power and lasts fo 50,000 hours or more
  • No noeed to shut lights off, enter a plenum or trigger a door switch
  • Rated up to 5 amps per connection
  • 5-year product warranty
View Detail

Ask the expert

Have questions? Just ask!